














Suede Engineer Boot - Sand Beige Nubuck
Couldn't load pickup availability
Pickup currently unavailable at S&S West Berkeley
Pairs well with
Description
This is a limited-edition seasonal release of Attraction's popular Lot 329 Engineer Boots, made from a handsome "sand beige" steerhide nubuck leather. The Lot 329 boots are cut with a low profile and smooth, rounded edges, featuring a partially structured toebox that will collapse over time and magnify this effect.
The leather they're made from begins as raw steerhide, sourced from Toronto, Canada, then combination-tanned in Japan (meaning the hides were made into leather using both "vegetable" tannins and "chrome" tannins). Nubuck is a type of "corrected grain" leather, produced by sanding or finishing a smooth surface into a more tightly-napped approximation of suede, and is notable for its dramatic patina and ease of wear.
It's finished with some classic Engineer Boot trims: a custom BILTBUCK outsole and heel, solid brass buckles from Poland, and stamped leather insoles. The Goodyear flat welt construction means that a trusted cobbler can rebuild these when the soles wear down, extending the lifetime dramatically with proper care.
Choose 0.5 size smaller than your Brannock size for the best fit. See sizing info for more details.
- Built on the Attractions A008 Freeman Last
- Sand beige cowhide nubuck upper leather
- 270 degree Goodyear flat welt
- Partially structured toebox
- Brass buckles from Poland
- Rolled shaft edges
- Steel shanks
- BILTBUCK heel and outsole
- Unlined shaft
- Tonal stitching
- Take 0.5 size smaller than Brannock
- Made in Japan
Shipping
Returns

Suede Engineer Boot - Sand Beige Nubuck
Size Guide
Built on the Attractions A008 Freeman Last (same as their Lot 269 Engineer Boots).
The Freeman last has one of our favorite profiles ever - cut with a smooth and sleek silhouette, they're visually slim while still accommodating for larger feet. The toe is handsomely almond shaped, cutting the perfect balance of roundness and point.
These are a standard D-width engineer with a comfortable shaft and secure fit that only gets better over time as they take the shape of your feet. Featuring very typical sizing for a heritage boot, we suggest going 0.5 size down from Brannock for the best fit.
Need help with sizing? Contact us.
- Narrow and low volume feet:
- 0.5 size smaller than Brannock
- D-Width and average volume feet:
- 0.5 size smaller than Brannock
- E & EE-Width and high volume feet:
- Same size as your Brannock size
Curious as to how we size our garments? Check out how we measure.

