Cowboy Boot "Horned Moon" - Brown Horsehide - HR Last
Couldn't load pickup availability
Product details
Clinch is made by BRASS, one of the first high-end shoe repair shops to open in Japan, owned and operated by Minoru Matsuura. They quickly evolved from shoe repair; to re-lasting to their custom lasts; to building incredible footwear around their custom lasts.
These lasts are where the magic is. Most modern lasts are optimized for mass-production. Wider, straighter, easier to pump through a production line, and easier to fit every single person into. Clinch's lasts start narrow, with a tight fit and a lot of contours to them, much like the lasts of the early 20th century.
The "Horned Moon" Cowboy Boots are an S&S-Exclusive style, featuring Clinch's usual stellar construction paired with some of the most tasteful and handsome embellishments we've seen on a Cowboy Boot. Available in two different colors of premium horsehide leather, both styles feature looping double-needle embroidery as well as crescent moon and star cutouts at the top of the shaft.
They're constructed with a 270 degree flat welt featuring a single row of tonal stitching, complimenting the sleek look and low profile of the last. Clinch's welting process is highly precise, utilizing "old-world" manufacturing processes in tandem with their custom lasts & patterns. First, the insole is soaked, then molded to the bottom of the last. From there, the boot is build around that insole. Every step of the welting process is done by hand, except for the final sewing of the outsoles, a task best done by machine.
They're made from a rich horsehide leather with a gentle shine and subtle pull-up effect, meaning that areas under tension or that move regularly will appear lighter in tone, while less stressed sections will remain darker. Built Clinch's HR Last, they're generally a bit more slim all around than the Clinch Engineer Boot, with a comparable heel & taller instep. We've had the most success recommending folks take one half size smaller than their Brannock size for a D-width (average) foot.
Even the most minor details are considered - from the woven internal pull tabs, to the star and moon punchouts, to the full leather lining and leather insole, to the looping embroidery. They stand on reproduced O'Sullivan heels and half soles, made exclusively for Clinch to their exacting specifications, and feature an excellent low profile, with solid traction and durability.
Built on the HR Last. See sizing tab for advice on fit.
- Brown horsehide leather
- Clinch HR last
- Full leather lining
- Leather insole
- 270 degree flat welt
- Hand-sewn welted construction
- Embroidered shaft details
- Pull on style
- Woven internal pull tabs
- Star and moon punchout details
- Nails from Japan
- Welting from Japan
- O'Sullivan's reproduction heels & half soles
- Resoleable and rebuildable
- Unstructured toebox
- Hand-made in Tokyo
Shipping
Returns
Cowboy Boot "Horned Moon" - Brown Horsehide - HR Last
Couldn't load pickup availability
Product details
Clinch is made by BRASS, one of the first high-end shoe repair shops to open in Japan, owned and operated by Minoru Matsuura. They quickly evolved from shoe repair; to re-lasting to their custom lasts; to building incredible footwear around their custom lasts.
These lasts are where the magic is. Most modern lasts are optimized for mass-production. Wider, straighter, easier to pump through a production line, and easier to fit every single person into. Clinch's lasts start narrow, with a tight fit and a lot of contours to them, much like the lasts of the early 20th century.
The "Horned Moon" Cowboy Boots are an S&S-Exclusive style, featuring Clinch's usual stellar construction paired with some of the most tasteful and handsome embellishments we've seen on a Cowboy Boot. Available in two different colors of premium horsehide leather, both styles feature looping double-needle embroidery as well as crescent moon and star cutouts at the top of the shaft.
They're constructed with a 270 degree flat welt featuring a single row of tonal stitching, complimenting the sleek look and low profile of the last. Clinch's welting process is highly precise, utilizing "old-world" manufacturing processes in tandem with their custom lasts & patterns. First, the insole is soaked, then molded to the bottom of the last. From there, the boot is build around that insole. Every step of the welting process is done by hand, except for the final sewing of the outsoles, a task best done by machine.
They're made from a rich horsehide leather with a gentle shine and subtle pull-up effect, meaning that areas under tension or that move regularly will appear lighter in tone, while less stressed sections will remain darker. Built Clinch's HR Last, they're generally a bit more slim all around than the Clinch Engineer Boot, with a comparable heel & taller instep. We've had the most success recommending folks take one half size smaller than their Brannock size for a D-width (average) foot.
Even the most minor details are considered - from the woven internal pull tabs, to the star and moon punchouts, to the full leather lining and leather insole, to the looping embroidery. They stand on reproduced O'Sullivan heels and half soles, made exclusively for Clinch to their exacting specifications, and feature an excellent low profile, with solid traction and durability.
Built on the HR Last. See sizing tab for advice on fit.
- Brown horsehide leather
- Clinch HR last
- Full leather lining
- Leather insole
- 270 degree flat welt
- Hand-sewn welted construction
- Embroidered shaft details
- Pull on style
- Woven internal pull tabs
- Star and moon punchout details
- Nails from Japan
- Welting from Japan
- O'Sullivan's reproduction heels & half soles
- Resoleable and rebuildable
- Unstructured toebox
- Hand-made in Tokyo
Shipping
Returns
Size Guide
If you have any questions about sizing, or are unsure of your size, please contact us before ordering.
Built on the HR Last
- Narrow and low volume feet:
- 0.5 size smaller than Brannock
- D-Width and average volume feet:
- 0.5 size smaller than Brannock
- E-Width and high volume feet:
- Same size as Brannock